Cutting die machinery

The model perimeter is the indicator acquiring the image through high resolution optical scanning. Once the model has inserted, it is conveyed automatically. Perimeter in cm. is immediately shown on a large display. The indicator can take special measurements of notches existing in the model, ser...

Hydraulic shear for steel with mechanism for straightening or cutting to measure, automatic cycle for single pieces and series, keyboard setting and positioning with display, capable of receiving data directly from the external computer or the scanner. System of sliding upon ferrules inserted ont...

Hydraulic shear for steel with mechanism for straightening and cutting to measure, automatic cycle for single pieces and series, automatic identification of steel type, keyboard setting and positioning with display, capable of receiving data directly from the external computer or the scanner. Con...

Hydraulic machine for cutting steel strips to obtain dies measuring max. 50x4 mm. The cutting unit assembled on balls recirculating sliding bushes can move along the bars connecting the machines sides and thus be placed in front of the steel container that has been chosen. As the bars standard le...

Hydropneumatic shears for cutting steel. Mounted on sliding rails with a range of 12 roll holders of stan­dard measure, easily replaceable and resharpenable blade with possibility of registering the degree of cutting-play.

Technical data:

Compressed air feed at 6 bar.

Cutting capacity: 32x3 mm.

Ai...

Bending machine with pendulum control for cold working of steel for dies of various types and dimensions. Built in several models, its peculiarity are the square section slides that give more sturdiness, support for block eccentric, movement on bearings, gibs. lnterchangeable for an easy replacem...

The MS1 series bending machines represent a step forward in the normal STERN bending machines with the addition of an electronically controlled device for motorised movement of the front slide. The slide can be moved either constantly or step by step. Furthermore, it is possible to adjust the for...

The SC1 power-assisted pendulum bending machine represents a step forward in the normal STERN bending machines with adjustable tools (7.101.000). The machine is equipped with a high tech system developed by STERN technicians which means the operator has to exert less force on the pendulum. Nevert...

Hydraulic punching machine for steel drilling by dies with thickness max 2,5 mm. Regrindable matrix and punch, easy to be replaced, with wide range of diameters and slots either horizontal and vertical. Max diameter of punch's body 10 mm (molds not shown on the catalogue sup­plied on request). Su...

A hydraulic abutting machine suitable for cutting steel to a variety of profiles. Particularly suited to the production of various sizes of shaped indent, with or without notches to mark the welding positions. The speciality of the machine is its capacity to easily replace group cutting in order ...

Edging hydraulic shears for shaping the steel at the beginning of the punch. A steel edging enables the end of the punch to be joined to the cutting edge without welding. The standard machine has blades and a centring guide for steel heights 20 and 30, or 19-32. Special blades are also available ...

Hydraulic shears for final cutting to remove excess steel in the production of punches. Adjustable support panel in aluminium, shaped blades for cutting the punches with a closing angle of up to 30°. Possibility of registering the degree of blade play. Made in standard right-hand use, with option...