ART 11.500.000 Perimeter indicator TOP ONE
code: 11 500 000 - Cutting die machinery
The model perimeter is the indicator acquiring the image through high resolution optical scanning. Once the model has inserted, it is conveyed automatically. Perimeter in cm. is immediately shown on a large display. The indicator can take special measurements of notches existing in the model, series measurements and, furthermore, sets an additional size. Direct connection to steel shears provided with conveyor. Connection to remote calculation system by means of serial interface RS232.
Technical data:
Resolution: 0,25 mm.
Model max. size:
width: 500 mm.
length: 1500 mm.
Reading rate: 250 mm/s.
Display resolution: 1mm.
Typical mean square error in a series of 20 readings of the same model: -0; ± 6 mm.
Optional:
Model with printer assembled on the machine for measurements to be written on a strip of paper.
Technical data:
Resolution: 0,25 mm.
Model max. size:
width: 500 mm.
length: 1500 mm.
Reading rate: 250 mm/s.
Display resolution: 1mm.
Typical mean square error in a series of 20 readings of the same model: -0; ± 6 mm.
Optional:
Model with printer assembled on the machine for measurements to be written on a strip of paper.
